Shutter image loading
News category
Contact us

Shanghai revstone energy saving equipment Co. Ltd. 

Telephone: 021-56066886
Fax: 021-51556076
Mailbox: 982656854@qq.com
Address: Shanghai City, Songjiang Chang Bang Road 801 Lane (Jiuzhou WTO) room 1029 No. 22

 

  • Pump engineering consulting
Pump shaft action of pipeline centrifugal pump
[2015-04-07]

Sealing ring of pipeline centrifugal pump is also known as anti leakage ring. The gap between the impeller and the pump shell is too large, the pump shaft is connected by coupling and motor, the motor torque to the impeller in the pump will cause the high pressure zone of the water flow through the gap area of low pres...

[2015-05-04]

As a centrifugal pump, stainless steel pipeline centrifugal pump application is very wide, in the choice of stainless steel centrifugal pump needs to consider what issues?What is the 1, the exhausted medium, the stainless steel centrifugal pump for the selection of desirable factors is very important. As you know, the ...

[2015-05-04]

The basic structure of the pipeline centrifugal pump is composed of six parts, namely, impeller, pump body, pump shaft, bearing, seal ring, stuffing box.ImpellerCentrifugal pump is the core part of its high output power, the impeller on the blade and play a major role in the assembly before the impeller through the sta...

[2015-05-04]

1 self suction pipeline centrifugal pump is a new type of pump which is designed and manufactured in our country in recent years. It is not the end of valve, before starting to pump the water poured into a small, start, can automatic vacuum water. After the shutdown, then start the next time, you do not need to carry o...

[2015-05-04]

Magnetic pump types of domestic manufacturers can generally be divided into: stainless steel magnetic pump, engineering plastic magnetic pump, fluorine plastic magnetic pump, high temperature magnetic pump, multi-stage magnetic pump, etc.. Supply magnetic pump, stainless steel magnetic pump, high temperature magnetic p...

[2015-05-04]

Horizontal pipeline centrifugal pump in use and pay attention to matters that need to be a lot of methods, can play an important role and value in different industries and areas, but in the use of the need to ensure adequate preparation and use requirements, the normal way and the principle of. The structure characteri...

[2015-05-04]

(1) pipeline centrifugal pump inlet pipe of the water inlet from the inlet wall and bottom distance is less than the diameter of the inlet. If the bottom sediment and dirt, water from the bottom of the distance is less than 1.5 times the diameter of the pumping water, will cause the poor or inhaling sediment debris, pl...

[2015-05-04]

If you do not change the multi-stage centrifugal pump body itself, regulating valve, increase the diameter of the inlet and outlet, reduce the multi-stage centrifugal pump Yang Cheng, can increase the flow rate. If you can change the multi-stage centrifugal pump, it will change the impeller (and multi-stage centrifugal...

[2015-05-04]

Pipeline sewage pump installation technology is the key to determine the installation height of the pipeline sewage pump is the suction process. The height is the vertical distance from the water surface to the center line of the centrifugal pump impeller, it allows suction confused on a high vacuum, high vacuum suctio...

[2015-05-04]

Pipeline sewage pump installation technology is the key to determine the installation height of the pipeline sewage pump is the suction process. The height is the vertical distance from the water surface to the center line of the centrifugal pump impeller, it allows suction confused on a high vacuum, high vacuum suctio...

[2015-05-04]

Pipeline sewage pump installation technology is the key to determine the installation height of the pipeline sewage pump is the suction process. The height is the vertical distance from the water surface to the center line of the centrifugal pump impeller, it allows suction confused on a high vacuum, high vacuum suctio...

[2015-05-04]

If you do not change the multi-stage centrifugal pump body itself, regulating valve, increase the diameter of the inlet and outlet, reduce the multi-stage centrifugal pump Yang Cheng, can increase the flow rate. If you can change the multi-stage centrifugal pump, it will change the impeller (and multi-stage centrifugal...

[2015-05-04]

Stainless steel magnetic pumpMagnetic pump types of domestic manufacturers can generally be divided into: stainless steel magnetic pump, engineering plastic magnetic pump, fluorine plastic magnetic pump, high temperature magnetic pump, multi-stage magnetic pump, etc.. Supply magnetic pump, stainless steel magnetic pump...

[2015-05-04]

When pumping water into the sediment or debris is not smooth(1) pipeline centrifugal pump inlet pipe of the water inlet from the inlet wall and bottom distance is less than the diameter of the inlet. If the bottom sediment and dirt, water from the bottom of the distance is less than 1.5 times the diameter of the pumpin...

homeup12nextend  goto  page